Sizes:
Available in rentable diameters of 12",16",20", 24", 30" and 36" with lengths
ranging from 4' to 16' in 2' increments.
Pressure Rating:
Springform is designed for maximum lateral pressure of 2400 lbs. psf.
Material Thickness:
The thickness of fiberglass material increases with diameter of the form. From
1/8" to 1/4" with additional thickness in the flange area.
Designed with the strength required for a fast, full liquid pour, Springform
columns up to 16 feet high can be poured with standard 150 pcf density
concrete. (2400 psf pressure maximum)
With its reusability and careful planning of pouring cycles, you can complete
a large number of columns with a very small number of forms.
Its smooth fiberglass surface and one vertical seam, leaves a beautiful
concrete finish which is always appreciated by owners and commonly specified by
architects.
Springform is reusable, virtually impervious to weather and requires little
maintenance.
The form is light-weight, so most sizes can be easily set up by two men.
A key bolt and wedge quickly secures the flange, and the bracing collar is
used as an anchor template at the bottom of the form, and as an aligner near
the top. Each collar is two half-sections that bolt around the column form and
through the flange. The attachment points secure the form during concrete
placement.
Whether using adjustable Column Form for columns up to 30" square or outside
corners with standard panels and fillers. Steel-Ply is very versatile to use
when creating columns of any dimension.
The Max-A-Form System allows for fast bullnose
forming when equipped with half-sections of circular column forms.
